PBT弹性体微相分离及对其力学性能的影响研究

为了获得微相分离对宽温PBT叠氮聚醚弹性体力学性能的影响规律,用红外光谱分析法(FT-IR)和动态热力学分析法(DMA)研究了PBT叠氮聚醚弹性体产生微相分离的机理和影响因素。用调节硬段含量、交联参数的方法调控其微相分离,控制适当的微相分离程度可显著改善推进剂的力学性能。研究结果表明:在二元醇扩链的弹性体体系中,当硬段含量约为15%时,弹性体发生相对最大比例的微相分离,体现出较佳的综合力学性能。通过微相分离的调控可获得宽温范围内综合力学性能较好的叠氮聚醚推进剂用粘合剂基体材料。     

Bayesian coronal seismology

In contrast to the situation in a laboratory, the study of the solar atmosphere has to be pursued without direct access to the physical conditions of interest. Information is therefore incomplete and uncertain and inference methods need to be employed to diagnose the physical conditions and processes. One of such methods, solar atmospheric seismology, makes use of observed and theoretically predicted properties of waves to infer plasma and magnetic field properties. A recent development in solar atmospheric seismology consists in the use of inversion and model comparison methods based on Bayesian analysis. In this paper, the philosophy and methodology of Bayesian analysis are first explained. Then, we provide an account of what has been achieved so far from the application of these techniques to solar atmospheric seismology and a prospect of possible future extensions.     

基于6σ设计的复合推力高速直升机总体参数多目标优化

针对复合推力高速直升机总体设计阶段总体参数的选择问题,提出一种提高可靠性和鲁棒性的基于6σ设计的改进多目标遗传算法优化方法。采用叶素理论和数值积分的方法分析计算了复合推力高速直升机气动及飞行性能,并以此为基础建立了约束函数和初步目标函数模型;将6σ设计融入改进的多目标遗传算法中,构造最终目标函数;在给定有效载荷设计要求下,对复合推力高速直升机总体参数进行了多目标优化设计。该方法获得了所需的Pareto解,优化后的复合推力高速直升机飞行性能相对原机有了较大改善,算例结果表明该方法有效可行。     

RATAN-600 and RadioAstron reveal the neutrino-associated blazar TXS 0506+056 as a typical variable AGN

The possible association with the high-energy neutrino event IceCube-170922A has sparked interest in the blazar TXS 0506+056. We present 72 instantaneous 1–22 GHz spectra measured over the past 20 years with the RATAN-600 telescope and compare them with the results of observations of 700 variable Active Galactic Nuclei (AGN) studied within the same program. The recent radio flare of TXS 0506+056 started from a minimum in 2013 and reached its first peak in December 2017 and a second peak in May-June 2018. This was the third strong radio flare in this source since 1997. The spectrum remains nearly flat during the flares. The spectral shape and variability pattern observed in TXS 0506+056 are typical for variable AGN. RadioAstron Space VLBI observations in 2013–2015 did not detect TXS 0506+056 on space-ground baselines of more than 9 Earth diameters. However, an observation on 23 September 2015 resulted in the detection of interferometric signal on 6 Earth diameter baselines at 18 cm close to the detection limit. We consider the possibility that TXS 0506+056 and other AGN may accelerate relativistic protons more efficiently than electrons. Relativistic protons are necessary to produce both the high-energy neutrinos observed in the IceCube Observatory and the high AGN brightness temperatures implied by the RadioAstron detection. They may also provide the main contribution to the observed synchrotron radiation of parsec-scale AGN jets. This supports the suggestion that relativistic protons may play a much more important part in extragalactic astrophysics than earlier anticipated.     

基于YOLO智能网络的红外弱小多目标检测技术

复杂背景下的红外弱小多目标检测是红外目标检测的难点,现有算法的稳健性难以满足实际弹载应用需求。针对弹载环境下的红外场景图像开展了基于典型深度学习网络模型的目标检测应用研究,提出一种基于YOLO(you only look once)网络的智能目标检测方法,通过高维特征学习表征和推理实现红外弱小多目标检测。采用传统的模板匹配算法和YOLO深度学习算法进行识别性能对比分析,验证了YOLO网络在红外弱小多目标检测方面的良好性能。实验结果表明:YOLO算法的检测概率可达92.2%,平均检测精度为0.844,与传统的模板匹配方法相比,YOLO具有明显的优势。     

基于G-M制冷机的大尺寸冷屏设计方法

介绍了基于Gifford-Mcmahon (G-M)制冷机的大尺寸冷屏的设计方法。该低温冷屏配合真空环境模拟室共同使用，为遥感卫星的星载遥感器等部件的红外定标试验提供20K的低温冷背景。该冷屏采用5台G-M制冷机进行制冷，外形尺寸达到1m×1m，是目前国内同类型冷屏中尺寸最大的。详细介绍了冷屏在容器内的安装布置、冷缩时的补偿等结构设计方法、冷屏的表面温度分布以及降温时间等计算分析。成功解决了大尺寸冷屏在低温环境下的冷缩补偿难题，试验结果表明:冷屏主要测点温度为15K，温度均匀性误差为±1K，达到并超过设计要求。      

一种悬挂物兼容飞机航电与武器总线的设计方法

在某悬挂物作为通用系统挂装不同型号飞机时,由于不同型号飞机对该悬挂物采用航电和武器两种不同的总线通信方式,导致该悬挂物不能兼容挂载多型飞机。本文针对现有的总线应用情况,提出了一种悬挂物可兼容飞机不同总线通信方式的设计方案,并给出了方案的具体实现方法。     

高超声速圆锥边界层失稳条纹结构实验研究

边界层转捩的准确预测是高超声速飞行面临的关键气动问题之一。为研究高超声速边界层失稳和转捩机理,以前缘半径1.6mm、半锥角7°的圆锥模型为研究对象,在FD-07高超声速风洞中采用红外热图技术开展边界层转捩实验测量。通过与工程计算结果对比,确认模型表面边界层流态。实验结果表明:有迎角条件下,模型表面中后段出现条纹结构,条纹结构的起始位置随着周向角的增加而向上游移动;随着迎角的增加,条纹起始位置向上游移动,条纹强度差异和条纹与模型中心线的夹角越来越大。实验获得的条纹结构与不同频率扰动波相互作用直接数值模拟获得的条纹结构现象一致。通过对比分析,认为边界层内不同频率扰动波相互作用是产生条纹结构的一种机制。